Regal V6-231 3.8L Turbo VIN 7 FI (1986)
Seat Belt: Recalls
Technical Procedure
ONLY THE LEFT-HANDED (DRIVER'S SIDE) SHOULDER BELT ANCHOR BOLT IS INVOLVED IN THIS CAMPAIGN PROCEDURE.
A.
Inspection
1.
Remove guide loop cover, shoulder belt anchor bolt and guide loop (Figure 1).
2.
Check for presence of a round threaded hole inside center pillar. Reinstall bolt and check that a torque of 35-48 N.m (26-35 lb. ft.) can be
achieved.