Regal V6-231 3.8L Turbo VIN 7 FI (1986)
FIGURE 3 - J 37361 AND J 37362 SEAL INSTALLERS
SERVICE ACTION
When servicing the input clutch housing and shaft assembly on a 1984 through 1988 THM 440-T4 transaxle use the new seal installation tools, J37361
and J37362 (Figure 3). The previous design tools, J34091 and J34092 will work on 1984-1986 transaxles only.
SERVICE MANUAL REFERENCE
Use Figure 3 to update information contained in your 1987 and 1988 THM 440-T4 Automatic Transaxle Unit Repair section.
SERVICE NOTES
For warranty purposes, when replacing the input clutch inner piston seal and 3rd clutch inner piston seal use Labor Operation K7535. For this operation,
and to recondition the transaxle completely, refer to the appropriate Labor Time Guide for applicable labor time information.
