Regal V6-231 3.8L Turbo VIN 8 4-bbl (1983)
Idle Speed Control Motor: Description and Operation
Computer Command Control (C-3) System
PURPOSE
On some models, idle speed is controlled by the Idle Speed Control (ISC) motor and ISC throttle switch.
ISC Motor Operation
The ECM monitors engine load--MAP--and engine speed--rpm--to determine the proper throttle opening.
The ECM then regulates engine speed by transmitting voltage signals to the ISC motor--opening or closing the throttle plates.
ISC Switch Operation
The ISC switch--mounted on the ISC motor housing--is closed when the ISC plunger contacts the throttle lever, and opens as the lever moves away
from the plunger.
-
When the switch contacts are closed the ISC motor controls idle speed.
-
When the switch contacts are open the ISC plunger cannot retract.
