Regal V6-231 3.8L Turbo VIN 8 4-bbl (1983)
Steering Gear: Service and Repair
Power Steering Gear Replace
1.
Disconnect pressure and return line hoses at steering gear and elevate ends of hoses higher than pump to prevent oil from draining out of pump.
2.
Remove pinch bolt securing coupling to steering gear.
3.
Jack up car and remove pitman shaft nut, then use a suitable puller to remove pitman arm.
4.
On full size models, remove sheet metal baffle that covers frame-to-gear attaching bolts, if equipped.
5.
Loosen the three frame-to-steering gear bolts and remove steering gear.
6.
Reverse procedure to install.
