Regal V6-231 3.8L VIN L SFI (1990)
The ABS Sensor is not serviced separately, replace the rear wheel bearing assemblies with P/N 7466987 bearings.
Part is currently available from GMSPO.
If a vehicle encounters this condition, both rear wheel bearing assemblies should be replaced.
Bearings with an improved seal entered production with VIN 2G4WB14L8L1433441.
IMPORTANT:
When removing the ABS electrical connector, refer to the following illustrations to insure against damaging any part of the connector which uses CPA
(Connector Position Assurance) locking pins.
WARRANTY INFORMATION:
Labor Operation Number:
T1680
Labor Time:
1.2 hours