Regal V6-231 3.8L VIN L SFI (1990)
Brake Caliper: Service and Repair
Caliper Installation
1.
Position caliper over rotor and onto mounting bracket.
2.
Lubricate entire length of mounting bolts with silicone based grease, then install bolts and tighten to specifications.
3.
If inlet fitting was removed, install fitting using new copper washer.
4.
Install front wheels, fill master cylinder to proper level, then bleed brake system as required. Before moving vehicle, pump brake pedal several
times to be sure it is firm. Do not move vehicle until a firm pedal is obtained.
