Regal V6-231 3.8L VIN L SFI (1990)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Balancer
Crankshaft Balancer
Holding Flywheel
Tools Required:
-
J 37096 Flywheel Holding Tool
-
J 38197 Crankshaft Balancer Puller
-
J 36660 Torque Angle Meter
Remove or Disconnect
1. Negative battery cable.
2. Serpentine drive belt.
-
Raise vehicle and suitably support.
3. Right front tire and wheel.
4. Inner fender splash shield (right side).
5. Flywheel cover.
6. Balancer retaining bolt, with assistant to keep flywheel from turning using tool J 37096.
-
Install J 38197.
7. Balancer.
8. J 38197