Regal V6-231 3.8L VIN L SFI (1990)
b.
Firmly apply parking brake and block drive wheels. Start engine and shift transaxle into "DRIVE".
c.
Allow engine to run a maximum of 10 minutes or until the engine cooling fan has cycled once, whichever occurs first.
d.
Shift transaxle to "PARK", then turn the ignition key to the "OFF" position for at least 5 seconds.
e.
Repeat step (b).
f.
Allow engine to run for at least 5 minutes.
23.
Install Campaign Identification Label.
Figure 1 Stoplamp Switch
Figure 2 Stoplamp Switch Cutaway Views
