Regal V6-231 3.8L VIN L SFI (1990)
Air Cleaner Fresh Air Duct/Hose: Service and Repair
Air Induction System
AIR FILTER ELEMENT
REMOVAL:
1.
Remove the nut from the air cleaner cover.
2.
Remove and inspect filter element for dust, dirt, water and replace if required.
INSTALLATION:
1.
Install the air filter element.
2.
Install the nut to the air cleaner cover.
AIR CLEANER ASSEMBLY
REMOVAL:
1.
Remove the air filter element.
2.
Remove the clamp from the rear air intake duct.
3.
Remove the air cleaner assembly.
INSTALLATION:
1.
Position the air cleaner assembly to the front intake duct.
2.
Clamp the rear intake duct to the air cleaner assembly.
3.
Install air cleaner element.
4.
Install the air cleaner cover and nut.
INTAKE AIR TEMPERATURE (IAT) SENSOR
