Regal V6-231 3.8L VIN L SFI (1990)
4.
Remove RH fuel tank strap attaching bolts/screws, remove spacer from strap if present, discard strap.
5.
Install strap spacer, P/N 10192675, on new strap, P/N 10199250, as shown on Illustration.
Parts are currently available from GMSPO.
NOTICE:
DO NOT BEND FUEL TANK STRAPS, AS THIS MAY DAMAGE STRAPS.
6.
Position strap and loosely install attaching bolts/screws.
7.
Repeat steps 4 thru 6 for LH strap.
8.
Insuring a minimum of 4 mm of clearance is maintained between fuel tank flange and underbody bar, torque attaching bolts/screws to 40-54 N-m
(29-39 lbs.ft.).
9.
Install exhaust heat shield and torque bolts/screws to 2 N-m (1.5 lbs.ft.).
10.
Remove support from under fuel tank and lower vehicle.
WARRANTY INFORMATION:
Labor Operation Number:
T1677
Labor Time:
.4 Hours
