Regal V6-231 3.8L VIN L SFI (1990)
FIGURE 4
12.
Apply the adhesive to trim cover by placing brown backing paper with adhesive onto the trim cover and press firmly. Carefully remove brown
backing paper. Be sure adhesive remains on trim cover (Fig. 4, Views "B", and "C").
13.
Affix plastic shoulder belt cover plug to the trim cover, taking care to center cap over hole and adhesive area (Fig. 4, View "D").
14.
Repeat above steps 1-13 for opposite front door of vehicle.
15.
Install Campaign Identification Label.
