Regal V6-252 4.1L (1984)
Steering Gear Mount: All Technical Service Bulletins
Technical Procedure
STEERING GEAR ASSEMBLY
1.
Raise vehicle on hoist.
2.
Use a torque wrench and tighten the three (3) steering gear to frame attaching bolts to 100 N-m (74 ft..lbs.). Refer to illustration.
CAMPAIGN IDENTIFICATION LABEL
3.
Lower vehicle, raise hood, and install a Campaign Identification Label as follows:
Each vehicle modified in accordance with the instructions outlined herein will require a Campaign Identification Label. Each label provides a space
to include the campaign number, the five (5) digit Dealer Code of the dealer performing the campaign service, and the date vehicle was
campaigned. This information may be inserted with a typewriter or ballpoint pen. When installing label, clean the surface of the fan shroud and
apply the Campaign label.
