buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Recall - Steering Gear Bolt Torque > < Recall - Steering Gear Bolt Torque|Page 3711
Page 1
background image

Steering Gear Mount: Recalls
Warranty Information

Dealers are to submit each campaigned vehicle as a separate case on the one-line warranty document, Form S-764. Dealers submitting warranty claims
by teletype terminal are to transmit completions as a separate case.

FAILURE

OPER.

LABOR   OTHER      SUBLET

OPERATION COUNT

PART NO.

ALLOW.

CODE

NO.

HOURS

HOURS MTL. TWG.

Tighten Steering
Gear Bolts

-

-

-

96

V2630

.3

.1

-

*.1 hour for clerical administration.

Buick bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer." They are written to inform these technicians of conditions that
may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the
equipment, tools, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies
to your vehicle, or that your vehicle will have that condition. See your Buick Dealer for information on whether your vehicle may benefit from that
information.
Dear Buick Owner:

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.

General Motors has determined that a defect which relates to motor vehicle safety exists in some 1984 Regals. These vehicles were assembled with three 
steering gear to frame bolts, one of which may not have been tightened to the required specification. This condition could result in the steering gear
coming loose from the frame causing a loss of steering control and a possible vehicle crash without warning.

To prevent this from occurring on your vehicle, please contact your Buick Dealer to arrange a service date. The dealer will tighten the steering gear to
frame bolts. This service will be performed at no charge to you.

Instructions have been sent to your Buick Dealer. The labor time necessary to do this work will be about 20 minutes. Please ask your dealer if you wish
to know how much additional time will be necessary to process your vehicle.

If the steering gear should be loose from the frame while driving, prior to the time you have this service completed, you should bring the vehicle to a stop
out of the line of traffic, and turn off the ignition.

Your Buick Dealer is best equipped to provide service to ensure your vehicle is corrected as promptly as possible. However, if you take your vehicle to
your dealer on the agreed service date and he does not remedy this condition on that date or within five (5) days, we recommend you contact the
Customer Assistance Department, Flint home office, by calling:

1-800-521-7300 for all except residents of Alaska and Hawaii. In Alaska, call (503) 641-8350. In Hawaii, call (805) 497-8561.

After contacting your dealer and the Buick home office, if you are still not satisfied that we have done our best to remedy this condition without charge
within a reasonable time, you may wish to write the Administrator, National Highway Traffic Safety Administration, 400 Seventh Street, S.W.,
Washington, D.C. 20590, or call 800-424-9393 (Washington D.C. residents use 426-0123).

The enclosed Owner Reply Card identifies your vehicle. Presentation of the card to your dealer will assist in making the correction in the shortest
possible time. If you have sold or traded your vehicle, please let us know by completing the postage-paid Owner Reply Card and returning it to us.

We are sorry to cause you this convenience; however, we have taken this action in the interest of your safety and continued satisfaction with our
products.

Recall - Steering Gear Bolt Torque > < Recall - Steering Gear Bolt Torque|Page 3711