Regal V6-3.8L SC VIN 1 (1998)
Console: Service and Repair
Armrest
REMOVAL PROCEDURE
1. Raise the front floor console armrest.
2. Remove the screws from the front floor console armrest hinge at the front floor console armrest.
3. Remove the front floor console armrest from the front floor console.
INSTALLATION PROCEDURE
1. Install the front floor console armrest to the hinge at the floor console.
NOTE: Refer to Fastener Notice in Cautions and Notices.
2. Install the screws to the front floor console armrest hinge.
Tighten
Tighten the front floor console screws to 2 N.m (18 lb in).
3. Install the lower front floor console armrest.