Regal V6-3.8L SC VIN 1 (1998)
1. Lubricate the following components with silicone grease:
^
New bolt boots
^
New bushings
2. Install the following components into the caliper bracket (2):
^
The bolt boots (1)
^
The bushings
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install the caliper bracket with the bracket bolts.
^
Tighten the caliper bolts to 185 Nm (137 ft lbs).
4. Install the caliper. Refer to Brake Caliper Replacement (Front).
