Regal V6-3.8L SC VIN 1 (1998)
11. Inspect the piston boot for the following conditions:
^
Cuts
^
Tears
^
Deterioration
Replace the bolt boots in the caliper bracket if damage exists. Refer to Brake Caliper Overhaul (Front).
12. Inspect the bolt boots in the caliper bracket for the following conditions:
^
Cuts
^
Tears
^
Deterioration
Replace the bolt boots in the caliper bracket if damage exists. Refer to Brake Caliper Bracket Replacement (Front).
13. Inspect the caliper bolts (1) for corrosion or damage. If corrosion is found, use new parts, including bushings, when installing the caliper. Do not
attempt to polish away corrosion.
INSTALLATION PROCEDURE
1. Install the caliper housing (1) over the rotor and the caliper bracket (2). Ensure that the bushings are in place.
