Regal V6-3.8L SC VIN 1 (1998)
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install the wheel cylinder mounting bolts (2).
^
Tighten the wheel cylinder mounting bolts to 12 Nm (110 inch lbs).
4. Install the brake pipe inlet tube nut.
5. Install the plug to the brake line.
^
Tighten the nut to 17 Nm (12 ft lbs).
6. Install the bleeder valve (1).
^
Tighten the valve to 7 Nm (62 inch lbs).
7. Bleed the wheel cylinder. Refer to Hydraulic Brake System Bleeding in Hydraulic Brakes.
8. Install the shoes and linings. Refer to Brake Shoe Replacement.
9. Install the tires and the wheels. Refer to Wheel Installation in Tires and Wheels.
10. Lower the vehicle.
