buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

ABOUT US
Park Brake Cable Replacement (Front)|Page 12483 > < Park Brake Cable Replacement (Front)|Page 12481

Regal V6-3.8L SC VIN 1 (1998)

Page 2
background image

INSTALLATION PROCEDURE

1. Place the cable in position.
2. Install the cable on the support bracket using the J 37043.
3. Install the cable on the actuator lever.

4. Install the cable on the mounting bracket.

5. Tighten the nut on the equalizer in order to remove the slack in the cable.
6. Lower the vehicle.
7. Adjust the parking brake. Refer to Park Brake Cable Service/Adjustment (Disc Brake).

Park Brake Cable Replacement (Front)|Page 12483 > < Park Brake Cable Replacement (Front)|Page 12481