Regal V6-3.8L SC VIN 1 (1998)
Notice: This bolt is designed to permanently stretch when tightened. The correct part number fastener must be used to replace this type of
fastener. Do not use a bolt that is stronger in this application. If the correct bolt is not used, the parts will not be tightened correctly. The system or
the components may be damaged.
6. Install the rocker arm bolt(s).
^
Tighten the rocker arm bolt(s) to 15 Nm (11 ft. lbs.). Use the J 36660.
Notice: Refer to Fastener Notice in Service Precautions.
7. Install the valve rocker arm cover(s).
8. Inspect the valve train for noise.
