Regal V6-3.8L SC VIN 1 (1998)
12. Install the air conditioning compressor bracket bolts.
13. Connect the power steering oil cooler pipe brackets to the frame.
14. Install the right engine splash shield.
15. Install the right front tire and wheel.
16. Connect the three-way catalytic converter to the right exhaust manifold.
17. Lower the vehicle.
18. Remove the J 28467-B J 28467-90A J 36462-A.
19. Install the drive belt.
20. Install the engine mount struts.
21. Carefully install the throttle body air inlet duct.
22. Connect the battery ground (negative) cable.
23. Measure the wheel alignment.
