Regal V6-3.8L SC VIN 1 (1998)
6. Install the strut tower tube (J 28467-3) into the strut tower support assemblies (J 28467-5A).
7. Install the 1/2 inch x 2.5 inch quick release pin (J 28467-10) through the strut tower support assemblies (J 28467-5A) and the strut tower tube (J
28467-3) on one side only.
8. Install the radiator shelf tube (J 28467-2A) on the top of the strut tower tube (J 28467-3) on the driver side.
9. Install the round tube of the front support assembly (J 28467-4A) through the large hole in the radiator shelf tube (J 28467-2A).
