Regal V6-3.8L SC VIN 1 (1998)
10. Install the 7/16 inch x 2.0 inch quick release pin (J 28467-9) through the hole in the front support assembly (J 28467-4A) in order to level the
radiator shelf tube (J 28467-2A).
11. Install the cross bracket assembly (J 28467-11A)
12. Install the lift hook (J 28467-7A) through the lift hook bracket (J 28467-6A).
13. Install the 1/2 inch lift hook washer and lift hook wing nut (J 28467-34) onto the lift hook (J 28467-7A).
14. Install the assembled lift hook bracket (J 28467-6A) over the passenger side radiator shelf tube (J 28467-2A).
15. Adjust the passenger side radiator shelf tube (J 28467-2A) and the assembled lift hook bracket (J 28467-6A) in order to align the hook with the
left (front), rear of engine, lift hook bracket attached to the left (front) exhaust manifold.
16. Install the lift hook (J 28467-7A) through the lift hook bracket (J 28467-6A).
17. Install the 1/2 inch lift hook washer and lift hook wing nut (J 28467-34) onto the lift hook (J 28467-7A).
18. Install the assembled lift hook bracket (J 28467-6A) over the strut tower tube (J 28467-3).
