Regal V6-3.8L SC VIN 1 (1998)
1. Install and suitably support the exhaust muffler with exhaust pipe and tail pipe.
2. Install the exhaust hanger insulators to the exhaust muffler with exhaust pipe and tail pipe.
3. Install the catalytic converter gasket.
4. Install the catalytic converter bolts.
^
Tighten the catalytic converter bolts to 45 Nm (33 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
5. Remove the support from the exhaust system.
6. Lower the vehicle.
7. Inspect the exhaust system for leaks and underbody contact.