Regal V6-3.8L SC VIN 1 (1998)
Blower Motor: Service and Repair
Blower Motor
Remove or Disconnect
1. Battery ground negative cable.
2. Right side instrument panel insulator.
3. Blower motor cooling hose.
4. Blower motor electrical connectors.
5. Blower motor mounting screws.
6. Blower motor.
Install or Connect
1. Blower motor and mounting screws.
Tighten
^
Screws to 20 N.m (14 lb. ft.).
2. Electrical connectors.
3. Blower motor cooling hose.
4. Right side instrument panel insulator.
5. Battery ground negative cable.