Regal V6-3.8L SC VIN 1 (1998)
Compressor Components - Disassembled View
Remove or Disconnect
1. Recover refrigerant using J 39500-GM
2. Disconnect the electrical connector from the switch in the rear head of the compressor.
3. Remove the switch retaining ring, using J 5403 internal snap ring pliers.
4. Remove switch from compressor.
5. Remove old O-ring seal from switch cavity using J 9553-01 O-ring removal tool or equivalent.
NOTICE: If existing switch will be reinstalled in compressor, a new O-ring seal must be used and preferably a new retainer ring should also be