Regal V6-3.8L SC VIN 1 (1998)
Intake Air Temperature Sensor: Description and Operation
DESCRIPTION
The Intake Air Temperature (IAT) sensor (3) is a thermistor which changes value based on the temperature of air entering the engine. Low
temperature produces a high resistance (100,000 ohms at -40°C/-40°F), while high temperature causes low resistance (70 ohms at 130°C/266°F).
OPERATION
The PCM supplies a 5 volt signal to the sensor through a resistor in the PCM and measures the voltage. The voltage will be high when the incoming
air is cold, and low when the air is hot. By measuring the voltage, the PCM calculates the incoming air temperature. The IAT sensor signal is used to
adjust spark timing according to incoming air density.
