Regal V6-3.8L SC VIN 1 (1998)
Torque Converter Clutch Solenoid: Service and Repair
4T60-E Automatic Transaxle
Torque Converter Clutch (TCC) Solenoid Replacement
REMOVAL PROCEDURE
1. Remove the case side cover. Refer to Case Side Cover Replacement.
2. Disconnect the transaxle wiring harness.
3. Remove the torque converter clutch solenoid (315).
INSTALLATION PROCEDURE
1. Install the torque converter clutch solenoid (315).
2. Connect the transaxle wiring harness.
3. Install the case side cover. Refer to Case Side Cover Replacement.
TCC PWM Solenoid Replacement
REMOVAL PROCEDURE
