Regal V6-3.8L SC VIN 1 (1998)
Body Control Module: Scan Tool Testing and Procedures
Cycle BCM Outputs
Use a Tech 2 scan tool to cycle Body Control Module (BCM) outputs. Refer to the Tech 2 scan tool user's manual for menu navigation instructions.
Use this feature to determine if the BCM is able to activate an output, regardless of BCM inputs. Use a Tech 2 scan tool to select a BCM output and
command the BCM to activate the output. The Tech 2 scan tool then displays the status of the selected output. The status information represents only
what the BCM has commanded, not what action was actually taken. Check if the BCM is performing each of the selected output functions.
