Regal V6-3.8L SC VIN 1 (1998)
1. Install the retractor side belt to the vehicle. Be sure to seat the alignment tabs.
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Use the J 29843-9 to install the retractor side belt bolt.
Tighten
Tighten the retractor side belt bolt to 42 N.m (31 lb. ft).
3. Install the rear sound insulator.
4. Install the rear window trim panel. Refer to Rear Window Trim Panel in Body Rear End.
5. Install the retractor side belt to the floor anchor bolt.
Tighten
Tighten the retractor side belt bolt to 42 N.m (31 lb. ft).
6. Install the rear quarter lower and upper trim panels. Refer to Quarter Lower Trim and Quarter Upper Trim in Rear Quarters.
7. Install the rear seat back and cushion. Refer to Rear Seat Back in Seats and Carpet.
