Regal V6-3.8L SC VIN 1 (1998)
^
Tools Required
^
J 38764-1A Wheel Speed Sensor Installation Kit
1. Apply LOCTITE 620 to the mating surfaces of the wheel speed sensor (1) that contact the hub and bearing assembly (2).
2. Use a J 38764-1A with an arbor type press in order to install the left front wheel speed sensor (1) onto the hub and bearing assembly (2).
3. Install the hub and bearing assembly (2) to the vehicle. Refer to Front Suspension in suspension.
4. Install the front wheel speed sensor electrical connector (2).
5. Install the wheel and tire assembly. Refer to Tires and Wheels in Suspension.
6. Lower the vehicle.
