Regal V6-3.8L SC VIN 1 (1998)
3. Install the battery (positive) cable (7) to the starter solenoid BAT terminal.
NOTE: Refer to Fastener Notice in Cautions and Notices.
4. Install the starter solenoid BAT terminal nut.
Tighten
Tighten the starter solenoid BAT terminal nut (6) to 10 N.m (89 lb in).
5. Install the battery (positive) cable and battery (positive) cable junction block lead nut to the underhood accessory wiring junction block.
Tighten
Tighten the battery (positive) cable junction block lead nut to 10 N.m (89 lb in).
6. Install the remote positive stud cover.
