Regal V6-3.8L SC VIN 1 (1998)
Description
5. Install the Connector Position Assurance (CPA) to the driver yellow 2-way connector located at the base of the steering column.
Description
6. Install the left instrument panel insulator. Refer to Instrument Panel Insulators in Instrument Panel, Gauges and Console.
7. Install the SIR fuse to the fuse block. Refer to Fuse Block in Instrument Panel, Gauges and Console.
8. Install the right Instrument Panel Access Hole Cover.
9. Staying well away from both air bags, turn the ignition switch to the RUN position.
9.1.
The AIR BAG warning lamp will flash seven times.
9.2.
The AIR BAG warning lamp will then turn OFF.
10. Perform the SIR Diagnostic System Check if the AIR BAG warning lamp does not operate as described.
