Regal V6-3.8L SC VIN 1 (1998)
INSTALLATION PROCEDURE
1. Install the manual 2-1 band servo (106-116).
2. Install the manual 2-1 band servo cover gasket (105) into the case.
3. Install the manual 2-1 band servo cover (104).
4. Install the manual 2-1 band servo cover bolts (103).
^
Tighten the manual 2-1 band servo cover bolts (103) to 24 Nm (17 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
5. Install the accumulator (132).
6. Install the accumulator attaching bolts (131).
^
Tighten the accumulator attaching bolts (131) to 11 Nm (97 inch lbs.).
