Regal V6-3.8L SC VIN 1 (1998)
1. Install the oil pump (200) to the valve body (300).
2. Install the oil pump bolts (205-207).
^
Tighten the M6 X 1.0 X 20 bolt to 8 Nm (70 inch lbs.).
^
Tighten the M6 X 1.0 X 85 bolt to 12 Nm (106 inch lbs.).
^
Tighten the M6 X 1.0 X 95 bolt to 12 Nm (106 inch lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install the case side cover. Refer to Case Side Cover Replacement.
