Regal V6-3.8L SC VIN 1 (1998)
1. Install the automatic transaxle range selector cable through the hole in the dash.
2. Properly route and position the automatic transaxle range selector cable.
3. Install the automatic transaxle range selector cable to the PNP switch. Refer to Automatic Transmission Range Selector Cable Replacement (At
PNP Switch)
4. Install the automatic transaxle range selector cable to the shift control lever.
5. Install the steering column trim panel. Refer to Steering Column Filler Replacement in Instrument Panel, Gauges and Warning Indicators.
