Regal V6-3.8L SC VIN 1 (1998)
INSTALLATION PROCEDURE
1. Install the console shift control.
2. Install the console shift control nuts.
^
Tighten the console shift control nuts to 24 Nm (18 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install the park/lock cable. Refer to Park Lock Cable Replacement.
4. Install the automatic transaxle range selector cable. Refer to Automatic Transmission Range Selector Cable Replacement (At Console Shift
Control).
5. Install the console shift control wiring harness.
