Regal V6-3.8L SC VIN 1 (1998)
NOTICE: Refer to Fastener Notice in Service Precautions.
4. Remove the support from the transaxle.
5. Install the transaxle bracket to the transaxle mount upper nuts.
^
Tighten the transaxle mount upper nuts to 47 Nm (35 ft. lbs.).
6. Install the left engine splash shield. Refer to Splash Shield Replacement-Engine in Body and Frame.
7. Install the left front tire and wheel. Refer to Tire and Wheel Removal and Installation.
8. Lower the vehicle.