Regal V6-3.8L SC VIN 1 (1998)
2. Install the regulator mounting bolts.
Tighten
Tighten the window regulator bolts to 10 Nm (89 lb in).
3. Install the electrical connector.
4. Remove the tape supporting the window.
5. Lower the window far enough to gain access through the door metal to the bolts.
6. Install the window to regulator bolts.
Tighten
Tighten the window to regulator bolts to 10 Nm (89 lb in).
7. Install the water deflector.
8. Install the trim panel.
Rear Door - Sedan
WINDOW REGULATOR
Rear Door - Sedan
REMOVAL PROCEDURE
IMPORTANT: The door window regulator motor and door regulator are serviced as a unit.