Regal V6-3.8L SC VIN 1 (1998)
Wiper Blade: Service and Repair
Wiper Blade Element Replacement
REMOVAL PROCEDURE
1. Remove wiper blade from the wiper arm.
IMPORTANT: The wiper blade element must be replaced if it is removed from the wiper blade.
2. Remove the wiper blade element by pulling it out through wiper blade claws.
INSTALLATION PROCEDURE
1. Install the blade element in the wiper blade by sliding the wiper blade element through the wiper blade claws until the claw is locked into notches
in the wiper blade element.
2. Install the wiper blade to the wiper arm.