Regal V6-3.8L SC VIN 1 (1998)
Wiper Motor Linkage: Service and Repair
REMOVAL PROCEDURE
TOOLS REQUIRED
J 39232 Wiper Transmission Separator.
1. Remove the wiper arms from the wiper transmission drive shafts.
2. Remove the air inlet grille panel from the vehicle.
3. Remove the connector from the wiper motor.
4. Remove the wiper transmission from wiper motor crank arm using the J39232.
5. Remove three screws and the wiper drive system module from the vehicle.
6. Remove three grommets from the tube frame.
