Regal V6-3.8L VIN K (1997)
Hydraulic Assembly: Service and Repair
Service Precautions
CAUTION: Certain components in the Antilock Brake System (ABS) are not intended to be serviced individually. Attempting to remove or disconnect
certain system components may result in personal injury and/or improper system operation. Only those components with approved removal and
installation procedures should be serviced.
CAUTION: To help avoid personal injury, due to a retained load on the ABS brake modulator, the gear tension relief function of the scan tool must be
performed prior to removal of the ABS brake modulator/master cylinder assembly.
NOTICE: The following service procedures shall be performed only after the ABS brake modulator/master cylinder assembly has been removed from
the vehicle. Do not perform these procedures with the unit installed on the vehicle. Complete overhaul of the ABS brake modulator/master cylinder
assembly is not authorized, only the following steps. These steps will break the unit down into major components for replacement purposes.
