Regal V6-3.8L VIN K (1997)
Important:
To ensure that the proper clamp load will be present when installed, it is imperative that the threads on the caliper bracket bolts, as well as the
mounting holes in the knuckle, be cleaned of all debris and inspected before proceeding with installation.
5.
Clean and visually inspect threads of the caliper bracket bolts (2) and mounting holes in the knuckle.
6.
Apply LOCTITE(R) THREAD LOCKER 272 (GM P/N 12345493) or equivalent to the threads of the brake caliper bracket bolts (2).
7.
Install the caliper bracket (1) with the bracket bolts (2).
Tighten
Tighten the caliper bracket bolts to 180 N.m (133 lb ft).
8.
Install the front brake pads.
9.
Install the caliper.
Rear Brake Caliper Bracket Replacement (See Vehicles Listed Below)
^
1999-2001 Buick Century, Regal
^
1999-2001 Buick Regal (Export China)
^
2000-2001 Chevrolet Impala, Monte Carlo
^
2000-2001 Chevrolet Trans Sport (Export China)
^
1998-2001 Oldsmobile Intrigue
^
1997-2001 Pontiac Grand Prix
1.
Remove the caliper from the mounting bracket and support the caliper with heavy mechanics wire or equivalent. It is not necessary to disconnect
the hydraulic brake flexible hose from the caliper.
2.
Remove the rear brake pads.
