Regal V6-3.8L VIN K (1997)
Brake Master Cylinder: Vehicle Damage Warnings
General Warnings
WARNING: Overfilling the reservoir must be avoided due to the potential for overflow onto the nearby catalytic converters in the exhaust
system. Brake fluid is flammable, and contact with hot exhaust components could result in a fire and possible personal injury.
Precautions
CAUTION: Use only SUPREME 11 or equivalent DOT 3 brake fluid from a clean, sealed container. Do not use fluid from an open container
that may be contaminated with water. Improper or contaminated fluid could result in damage to components, or loss of braking, with possible
personal injury.
NOTICE: Avoid spilling brake fluid on any of the vehicle's painted surfaces, wiring cables or electrical connectors. Brake fluid will damage paint and
electrical connections. If any fluid is spilled on the vehicle, flush the area with water to lessen damage.
NOTICE: Power steering fluid and brake fluid must not be mixed. If brake seals contact steering fluid or steering seals contact brake fluid, seal damage
will result.
NOTICE: Always use the correct fastener in the proper location. When you replace a fastener, use ONLY the exact part number for that application. the
manufacturer will call out those fasteners that require a replacement after removal. the manufacturer will also call out the fasteners that require thread
lockers or thread sealant. UNLESS OTHERWISE SPECIFIED, do not use supplemental coatings (paints, greases, or other corrosion inhibitors) on
threaded fasteners or fastener joint interfaces. Generally, such coatings adversely affect the fastener torque and the joint clamping force, and may damage
the fastener. When you install fasteners, use the correct tightening sequence and specifications. Following these instructions can help you avoid damage
to parts and systems.
