Regal V6-3.8L VIN K (1997)
Vacuum Brake Booster: Technician Safety Information
WARNING: When replacing the power brake booster, make sure that the cruise control cable is not routed between the booster and the cowl.
If the cable is damaged or pinched, it must be replaced. Failure to do this could result in personal injury.
CAUTION: Replace all components included in repair kits used to service this booster. Lubricate rubber parts with silicone grease (provided in kits) to
ease assembly. Do not use lubricated compressed air on brake parts as damage to rubber parts may result. If any hydraulic component is removed or
disconnected, it is necessary to bleed the entire brake system. The torque values specified are for dry, unlubricated fasteners. Perform service operations
on a clean bench free from all mineral oil materials. Inspect locking flanges on brake booster and mounting plate. Replace the brake booster and
mounting plate if the locking flanges are bent or damaged.
