Regal V6-3.8L VIN K (1997)
Vacuum Brake Booster: Vehicle Damage Warnings
NOTICE: Internal components of this brake booster are not serviceable. The housing must not be unstaked and separated. Separating the housing will
cause permanent deformation, preventing the brake booster from holding proper volume.
NOTICE: Always use the correct fastener in the proper location. When you replace a fastener, use ONLY the exact part number for that application. the
manufacturer will call out those fasteners that require a replacement after removal. the manufacturer will also call out the fasteners that require thread
lockers or thread sealant. UNLESS OTHERWISE SPECIFIED, do not use supplemental coatings (paints, greases, or other corrosion inhibitors) on
threaded fasteners or fastener joint interfaces. Generally, such coatings adversely affect the fastener torque and the joint clamping force, and may damage
the fastener. When you install fasteners, use the correct tightening sequence and specifications. Following these instructions can help you avoid damage
to parts and systems.
