Regal V6-3.8L VIN K (1997)
Electronic Brake Control Module: Service and Repair
Antilock Brake System (ABS) With Traction Control System (TCS)
TCS Modulator Removal
Remove or Disconnect
1. Four-way Traction Control System (TCS) motor pack electrical connector.
2. Four brake pipes (two from ABS hydraulic modulator, two to front wheel brakes).
^
Place shop cloth on top of TCS motor pack to catch any dripping fluid. Take care not to allow any brake fluid to enter the bottom of the motor
pack or the electrical connectors.
3. Bolt attaching front of TCS hydraulic modulator/motor pack assembly to mounting bracket.
4. TCS hydraulic modulator/motor pack assembly from vehicle.
Install or Connect
1. TCS hydraulic modulator/motor pack assembly in vehicle.
2. Bolt attaching TCS hydraulic modulator/motor pack assembly to mounting bracket.
^
Tighten Bolt to 9 N.m (80 lb. in.).
3. Four brake pipes to TCS hydraulic modulator/motor pack assembly.
4. Four-way TCS motor pack electrical connector.
Important
^
Bleed brakes.
