Regal V6-3.8L VIN K (1997)
Timing Cover: Service and Repair
TOOL REQUIRED
^
J 37096 Flywheel Holding Tool
^
J 36660 Torque Angle Meter
REMOVAL
1. Disconnect the battery ground (negative) cable.
2. Remove the drive belt tensioner.
3. Remove the crankshaft balancer.
4. Remove the electrical connections from the front cover.
5. Remove the crankshaft position sensor shield.
6. Remove the crankshaft position sensor.
7. Remove the oil pan to the front cover bolts.
8. Remove the oil filter.
9. Remove the lower radiator hose. See Cooling System.
10. Remove the water pump pulley. See Cooling System.
11. Remove the front cover attaching bolts and front cover with the oil filter adapter as one assembly.