Regal V6-3.8L VIN K (1997)
Muffler: Service and Repair
Right Side
REMOVAL
1. Raise vehicle and suitably support.
2. Support exhaust pipe and right hand muffler.
3. Cut exhaust pipe at right hand muffler in front of weld. Cut must be made as close to the right hand muffler as possible to ensure adequate overlap
for clamping.
4. Hangers from muffler.
5. Tailpipe from muffler (if equipped).
6. Muffler.
INSTALLATION
1. Exhaust pipe clamp to end of new right hand muffler. Do not tighten.