Regal V6-3.8L VIN K (1997)
1.
Inspect and repair any damaged wires at the suspected area (1). Refer to Wiring Repairs in the Wiring Systems sub-section of the Service Manual.
Wrap the repaired area with 3M(R) Electrical Moisture Sealant Patches, P/N 06149, or equivalent. Wrap the entire area of contact with friction
material , P/N 22617849, to protect it from future damage.
2.
Verify proper installation of the harness clamp that attaches the harness to the transmission. Reinstall if necessary.
3.
Reposition the repaired harness away from the A/C accumulator. Pull the harness through the clamp at the transmission to remove any slack.
Parts Information
Parts are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use the table.
