Regal V6-3.8L VIN K (1997)
Mass Air Flow (MAF) Sensor: Service and Repair
Mass Air Flow Sensor W/MAP Sensor
The MAF sensor on this engine is attached to the throttle body assembly.
REMOVAL PROCEDURE
1. Disconnect the MAF sensor electrical connector.
2. Remove the three (3) screws holding MAF sensor to throttle body.
3. Remove the MAF sensor from the throttle body.
INSTALLATION PROCEDURE
1. Carefully position the MAF sensor to the throttle body.
2. Install three (3) screws holding the MAF sensor to the throttle body.
3. Connect the electrical connector.
